Wednesday, February 29, 2012
7:20 PM | 
Posted by
Valere
This tutorial was written on February 28, 2012 by Val aka LostAngel Graphics. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:
Supplies Needed:
++Paint Shop Pro (I used 12 but any version should work)
++Scrap kit by Heavens Designz called Heavens Love which is PTU and can be found HERE
++ Tubes of choice or the one I used. I used the work of Keith Garvey which you can be found HERE
Note you must have a valid license in order to use his work.
++Font of choice
++Font of choice
Let’s get Started!
Open a new image 600 x 400 (you can resize it later if you would like), transparent background.
Open HD_HeavensLove_TS_element 30 in psp.
Copy and paste as new layer.
Resize by 50%
Duplicate
Mirror.
Move both of the heart layers side by side in the center of the canvas..
Open HD_HeavensLove_TS_element 40 in psp.
Copy and paste as a new layer.
Move this to the center between the two hearts.
(You want to make it look like the two hearts are held together by the ribbon)
See my tag for reference.
Open HD_HeavensLove_TS_paper 3.
Resize it with following settings:
Change percent to pixels
And change it from 800 x 800 to 400 x 400
Copy and paste as a new layer.
Move it below heart layers and move it to behind the left heart.
Duplicate and move this behind the other heart.
Click on one of the heart layer.
Select your Magic wand
Click inside the heart.
Selections, modify, expand by 3.
Selections, modify, invert.
Click back on your paper below this heart.
Hit delete.
Select none.
Repeat this for the second heart and paper.
Highlight bottom layer.
Open HD_HeavensLove_TS_element 34.
Copy and paste as a new layer.
Move to left side of tag.
Duplicate
Mirror.
Open HD_HeavensLove_TS_element 32
Copy and paste as new layer.
Move to the right.
Duplicate
Mirror.
Open HD_HeavensLove_TS_element 29
Copy and paste as new layer.
Resize by 50 %
Resize again by 90%
Move to the bottom of canvas.
(This helps hide some of the green from the flower elements).
Go back to paper layer. Make sure it is highlighted.
Copy and paste tube of choice.
Resize if need to.
Move it to the left.
Adjust if you need to for placement within the heart frame.
Add drop shadow.
Duplicate
Mirror.
Adjust placement within the 2nd heart frame.
Go to heart layer.
Selections, modify, expand by 3.
Selections, Invert
Go to the tube layer and hit delete.
Select none.
Repeat this for the 2nd tube.
Add any other elements you would like as this scrapkit is full of beautiful elements to be creative with.
Add your correct copyright.
Add your name
Save and you are done.
This tutorial was written on February 27, 2012 by Val aka LostAngel Graphics. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:
++Paint Shop Pro (I used 12 but any version should work)
++Jasc Animation Shop
++Scrap kit by KnC Scrapz called Beautiful Moments which is PTU and can be found HERE
++ Tubes of choice or the one I used. I used the work of Keith Garvey which you can be found HERE
++Scrap kit by KnC Scrapz called Beautiful Moments which is PTU and can be found HERE
++ Tubes of choice or the one I used. I used the work of Keith Garvey which you can be found HERE
Note you must have a valid license in order to use his work.
++Font of choice
++Font of choice
Let’s get Started!
Open a new image 600 x 600 (you can resize it later if you would like), transparent background.
Open Element 5 in psp.
Copy and Paste as a new layer.
Resize by 90% and rename Frame Layer.
Open Paper 9 in psp.
Copy and Paste as a new layer.
Move this below your frame layer.
Go back to frame layer and select your magic wand.
On frame layer with magic wand, click inside of the heart.
Selections, Modify, Expand by 5.
Selections, Invert.
Go to paper layer and hit delete.
Select None.
Copy and Paste your tube as a new layer.
Move this between the frame layer and paper layer.
Duplicate tube and move to above the frame.
Add your drop shadow of choice to both of the tube layers.
Go to your duplicate tube layer and make sure you are on that layer.
Select the eraser tool and erase any part of the tube at the bottom of the frame.
(You want to make it look like your tube is coming out of your frame.)
Open Sequins 1 in psp.
Resize by 80% three times.
Copy and Paste as a new layer above the paper layer.
Duplicate and move this to fill the inside of the frame.
Merge both sequins layers together.
Duplicate this 2 times.
Rename each of these layers Sequin 1, Sequin 2, Sequin 3.
Hide Sequin 2, and 3 layers.
We will get back to these later.
Open beads in psp.
Copy and Paste as a new layer.
Move this below paper layer. Resize by 50%.
Go to Image, Free Rotate, Right 45.
Move to the upper left of canvas.
Duplicate, mirror, and flip.
Merge these 2 layers.
Add drop shadow of choice.
Make sure top layer is highlighted.
Open Element 12 in psp.
Copy and Paste as a new layer.
Resize by 50% and move to just below the point where your top tube and frame meet.
(See my tag as a reference, you want to make it look like your tube is coming out the frame to walk on your cloud.)
Open Love in psp.
Copy and Paste as a new layer.
Resize by 40% move to left side of canvas.
Add any additional elements you would like. See my tag as reference. This kit has lots of great elements to embellish your tags. Use your creative.
Add your correct copyright.
Add your name
Time To Animate!
Go back to your sequin layers.
Click on and select sequin 1 layer.
Go to Adjust, Add/Remove Noise, Add Noise
Use the following settings:
Uniform checked
Noise set to 45%
Monochrome unchecked.
Close off Sequin 1 layer and select Sequin 2 layer.
Repeat Add Noise
Use the same settings but change
Noise set to 55%
Close off Sequin 2 layer and select Sequin 3 layer.
Repeat add noise and change noise set 65%.
Make sure Sequin 2 and 3 layers are closed.
Make sure Sequin 1 layer is open and visible.
Copy Merged
Open Animation
Paste as new animation.
Go back in to psp.
Close off Sequin 1 layer.
Open Sequin 2 layer.
Copy Merged
Paste in Animation after current frame.
Go back into psp.
Close off Sequin 2 layer
Open Sequin 3 layer.
Copy Merge
Paste in Animation after current frame.
In animation you should now have 3 frames.
Adjust frame properties if need to.
Save as gif file and you’re done.
Wednesday, January 11, 2012
This tutorial was written on January 10, 2012 by Val aka LostAngel Graphics. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:
++Paint Shop Pro (I used 12 but any version should work)
++Scrap kit by Dn Scraps called Cupid Baby Love which is PTU and can be found HERE
++Vix_Mask446 that can be found HERE
++ Tubes of choice or the one I used. I used the work of Ismael Rac which you can be found HERE
Note you must have a valid license in order to use his work.
++Font of choice
++Font of choice
Remember to save as you go.
Let’s get started!
Open a new image 600 x 600 (you can resize it later if you would like), transparent background.
Open CupidBabyLovePaper 8 in psp. Go to Image, Resize then go to change from percent to pixels and resize it to 600 x 600. Make sure all layers are checked.
Copy and paste as a new layer.
Open Vix_Mask446 or a mask of choice.
Go to Layers, New Mask Layer and select the mask of choice, makes sure source luminance is checked and invert mask data is unchecked. Hit ok.
Merge group.
Open CupidBabyLoveBarberHeart3 psp. Copy and paste as a new layer.
Resize to 30 percent.
Move to the center of mask (canvas).
Open CupidBabyLoveBarberHeart in psp. Copy and paste as a new layer.
Resize to 30 percent.
Go to Image, Free Rotate, Left, Free 30.
Move heart to upper left side of first heart.
Open CupidBabyLoveHearts in psp. Copy and paste as a new layer.
Move to above mask layer.
Resize to 60 percent and move to left of canvas.
Open CupidBabyLoveHearts2 in psp. Copy and paste as a new layer.
Resize to 60 percent and move to the center of canvas.
Open CupidBabyLoveHearts3 in psp. Copy and paste as a new layer.
Resize to 60 percent and move to the left of the canvas.
Merge these three layers together.
Duplicate and Mirror.
Move to lower right side of canvas. (see my tag above for reference).
With the original merged layers move this to upper left of canvas.
Go back to top layer, make sure this is highlighted.
Open CupidBabyLoveBabyFrameHeart. Copy and paste as a new layer.
Resize to 50 percent.
Duplicate.
Go back to your original frame layer.
Go to Image, Free rotate, Left 45.
On duplicate frame layer, go to Image, Free Rotate Right 45.
(See my tag as reference)
Go back to your original frame layer duplicate this again.
Bring this frame above your 2nd frame.
See image as reference.
Rename these frames, Frame 1, 2, and 3
We are going to make it look like the frames are interlocking.
Go to Frame 3 Using your Eraser Brush remove the part of the frame that is going over the second frame.
See image below.
Copy and paste your tube below frame layers.
I choose 2 different close-up tubes for each of the frames. Resize if need to.
Make sure you are on Frame 1 and it is highlighted.
With Magic Wand, click inside of Frame 1. Go to Selections, Modify, Expand by 3.
Selections, Invert, go to your tube layer and hit delete. Select none.
Repeat this for frame 2 and your 2nd close up of tube.
Lower opacity for both tube layers to about 80 percent.
Go back to top layer, make sure it is highlighted.
Open CupidBabyLoveBabyBearLove. Copy and paste as a new layer.
Resize to 30 percent. Then Resize it again by 60 percent. Move it to where you like it.
Open CupidBabyLoveBow in psp. Copy and paste as a new layer.
Resize it by 20 percent.
Move to upper part of frame.
Duplicate and place duplicated bow on second frame. (See my tag for reference)
Add any other elements you would like from this point. Use your creativity.
Add drop shadows if you would like.
Add your correct copyright information.
Add your name.
Save and you’re done.
Wednesday, January 4, 2012
This tutorial was written on January 4, 2012 by Val aka LostAngel Graphics. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:
++Paint Shop Pro (I used 12 but any version should work)
++Soo Hot Template by Simply Tami Designs which can be found HERE
++ 6 to 12 Tubes of choice or the one’s I used. I used the work of Keith Garvey which you can be found HERE
Note you must have a valid license in order to use his work.
++Font of choice.
++Font of choice.
++Fire Graphic of choice.
Don’t forget to save as you go.
Let’s get Started!
Open Soo Hot Template in psp. Duplicate by hitting Shift D. Close the original template.
Remove the copyright layer.
Click on your backround layer.
Copy and paste tube where you would like it.
Repeat until you have the entire background filled.
Go to your first tube layer and merge down to your next tube layer. Repeat this until you have all your tubes on one layer.
Duplicate tube layer.
On the original tube layer change Blend mode to Luminance Legacy.
On your duplicated tube layer lower opacity to about 40.
Go to word art layer. Make sure it is highlighted.
Here’s where it might get tricky.
You are going to put you’re a face in each of the letters.
Copy and paste tube face over the letter “S” , repeat this for each letter.
Go back to the wordart layer, make sure it is highlighted.
With the magic wand select the letter “s”
Go to Selections, Invert, go to the first tube hit the delete.
Select None.
Repeat this step for each of the letters.
Go to the wave layer, using the magic wand click inside the wave.
Go to Selections, Modify, Contract by 4.
Add new raster layer.
Select your Clone Brush.
Open up your flame graphic in psp.
With your clone brush fill in the wave with the flames.
Select none.
Go to Copy of Wave and repeat the same step as above adding flames.
Select the frame layer.
Using magic wand select inside of frame. Select float, new raster.
Using clone brush add your flame all around the frame.
Select none.
Add inner bevel with the same settings.
Add your correct copyright.
Add your name and you’re done.
This tutorial was written on January 3, 2012 by Val aka LostAngel Graphics. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:
++Paint Shop Pro (I used 12 but any version should work)
++Scrap kit by Naughty Angel Creations called Cute N Dangerous which is PTU and can be found HERE
++ WSL_Mask 170 and WSL_Mask 176 that can be found HERE or mask of choice.
++ Tubes of choice or the one I used. I used the work of Alex Prihodko which you can be found HERE
Note you must have a valid license in order to use his work.
++Font of choice.
++Font of choice.
Don’t forget to save as you go.
Let’s get Started!
Open a new image 600 x 600 (you can resize it later if you would like), transparent background.
New raster and flood fill with #720056 or a color that matches your tube.
Open WSL_Mask 170 in psp. Go to Layers, New Mask Layer, from image and select your mask or WSL_Mask 170. Make sure Source Luminance is checked and Invert Mask Data is unchecked. Hit Ok.
Merge group.
Open pp1 in psp. Go to Image, Resize then go to change from percent to pixels and resize it to 600 x 600. Make sure all layers are checked.
Copy and paste as a new layer.
Open WSL_Mask 176 or a mask of choice.
Go to Layers, New Mask Layer and select the mask of choice, makes sure source luminance is checked and invert mask data is unchecked. Hit ok.
Merge group.
Open Frame 6 in psp. Copy and add as a new layer, resize to about 80%.
Open pp9 in psp. Go to Image, Resize then go to change from percent to pixels and resize it to 600 x 600. Make sure all layers are checked.
Go back to your frame layer.
Choose Eclipse tool width 0, foreground with any color and background to null.
Draw out a circle that is the same size as your frame. We will be deleting this later on.
With your wand select the inside of your circle.
Selections, Invert, Go to your pp 9 level make sure its selected click delete.
While selected add a close up of you tube and repeat to get rid of extra parts of tube that are outside the frame.
Select none.
Open ele20, resize by 60 percent, Copy and paste into frame and mover to the top of the frame.
Open Ele 8, Copy and Paste as a new layer.
Open Ele27 resize to 50 percent, Copy and paste as a new layer and move to bottom right of frame.
Copy and paste tube of choice, resize if you need to, move it to left of the frame..
Open Ele63 Resize to 50 percent and then resize it to 80 percent. Copy and paste as a new layer.
Open Ele4. Resize to 80 percent. Copy and paste as a new layer. Move to the Upper Right of frame.
Add your correct copyright.
Add your name and you’re done.
Subscribe to:
Posts (Atom)
