Tuesday, December 20, 2011
8:01 PM | 
Posted by
Valere
Decided to play in psp today. So I decided to use my good friends Naughty Angels kit Tropical Island Dreams and make it a Christmas in Paradise theme tag.
Tuesday, December 6, 2011
This tutorial was written on December 6, 2011 by Val aka LostAngel Graphics. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
++Scrap kit by Naughty Angel Creations called Christmas Ice which is PTU and can be found HERE
++Mask of Choice or Vix_Mask 428 that can be found HERE
++ Tubes of choice or the one I used. I used the work of Barbara Jensen which you can be found HERE
Let’s get Started!
Supplies Needed:
++Paint Shop Pro (I used 12 but any version should work)
++Scrap kit by Naughty Angel Creations called Christmas Ice which is PTU and can be found HERE
++Mask of Choice or Vix_Mask 428 that can be found HERE
++ Tubes of choice or the one I used. I used the work of Barbara Jensen which you can be found HERE
Note you must have a valid license in order to use her work.
++Font of choice
++Font of choice
Let’s get Started!
Open a new image 600 x 600 (you can resize it later if you would like), transparent background.
Open paper 5 in psp. Go to Image, Resize then go to change from percent to pixels and resize it to 600 x 600. Make sure all layers are checked.
Copy and paste as a new layer.
Open Vix Mask 428 or a mask of choice.
Go to Layers, New Mask Layer and select the mask of choice, makes sure source luminance is checked and invert mask data is unchecked. Hit ok.
Merge group.
Add new layer.
Flood new layer with black or a color of choice.
Apply Vix Mask 428 with same settings as above. Merge group .
Change Blend Mode to Overlay.
Open Fr1 in psp. Copy and add as a new layer
Open tube of choice. Copy and add as a new layer.
Move tube layer below frame. Duplicate and move this layer above frame layer.
While on this layer Select eraser tool and erase any parts of your tube that are covering the bottom part of
the frame. See my tag as a reference. You want it to appear as if your tube is coming out of the frame.
Open Ele35. Resize by 80 percent. Copy and add as a new layer. Move to lower right side.
Open Ele3. Resize by 70 percent. Copy and add as a new layer. Move to lower left side.
Open Ele1. Resize by 80 percent. Copy and add as a new layer. Move to lower left side.
You can personalize it any way you would like to at this point. I choose to write a little note to Santa on the
Rolled parchment. Get creative.
Add drop shadow.
Add your correct copyright information.
Add your name.
Save and you are done.
I was having a bit of a blue moment with the holidays so I came up with this using one of Naughty Angel Creations called White Xmas from Scraps and The City.
Friday, December 2, 2011
This tutorial was written on December 2, 2011 by Val aka LostAngel Graphics. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:
++Paint Shop Pro (I used 12 but any version should work)
++Scrap kit by Designs by Ali called Christmas Time which is FTU and can be found HERE
++ Tubes of choice or the one I used. I used the work of ORKUSART which you can be found @ PicsForDesigns HERE The tube I am using is under Free Illustrations but you must still have a valid license in order to use this work.
++Font of choice
Let’s get Started!
Open a new image 600 x 600. You can resize if you need to later.
Open DBA P10 in psp.
Copy and paste as a new layer.
Open Vix_Mask437 or a mask of choice.
Go to Layers, New Mask Layer and select the mask of choice, makes sure source luminance is checked and invert mask data is unchecked. Hit ok.
Merge group.
Open DBA Frame 2 in psp. Image, Resize by 60 percent. Copy and add as a new layer.
Open tube of choice. Copy and paste it as a new layer. Resize if you need to.
Open DBA TUBE35 Resize to about 40 percent. Copy and add as a new layer. Move to upper right of canvas.
Open DBA TUBE48 Resize to 40 percent. Copy and add as a new layer. Move to lower left of canvas.
Open DBA TUBE50. Resize to 50 percent. Copy and add as a new layer. Move to lower right of canvas.
Open DBA TUBE29. Resize to 30 percent and then again by 50 percent. Copy and add as a new layer. See my tag for placement.
Add a drop shadow to everything but the mask layer.
Add the Artist Copyright.
Add your name.
Save and your done.
Hope you enjoyed my tut.
Much Love and Happiness
Val
Aka
LostAngel Graphics
Thursday, December 1, 2011
Welcome to my first Tutorial!!!!!!
This tutorial was written on November 20, 2011 by Val aka LostAngel Graphics. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of PSP.
Supplies Needed:
++Paint Shop Pro (I used 12 but any version should work)
++Jasc Animation Shop
++Scrap kit by Naughty Angel Creations called Frosted Pink Christmas which is PTU and can be found HERE
++Mask of Choice or the WSL_Mask 341 that can be found HERE
++Scrap kit by Naughty Angel Creations called Frosted Pink Christmas which is PTU and can be found HERE
++Mask of Choice or the WSL_Mask 341 that can be found HERE
++ Tubes of choice or the one I used. I used the work of Keith Garvey which you can be found@ PTE HERE Note you must have a valid license in order to use his work.
++Font of choice
++Plugins needed Vanderlee SnowFlake and Mura Meister Copies
Let’s get Started!
Open a new image 600 x 600 (you can resize it later if you would like), transparent background.
Open paper 3 in psp. Go to Image, Resize then go to change from percent to pixels and resize it to 600 x 600. Make sure all layers are checked.
Copy and paste as a new layer.
Open WSL_Mask 341 or a mask of choice.
Go to Layers, New Mask Layer and select the mask of choice, makes sure source luminance is checked and invert mask data is unchecked. Hit ok.
Merge group and lighted mask to about 80.
Open Fr2 in psp. Copy and add as a new layer
With your wand select the inside of your frame. Selections, Modify, Expand by 3.
Open paper 5 and repeat the steps to resize it to 600 x 600 copy and add as a new layer.
Click on your frame and go to Selections, Invert, go back to paper and hit the delete to remove the excess paper from frame. Move paper below frame.
Click on the frame again and while it is still select click on your text tool and select a font (I used Brushed Script but you may want to you something else) change the foreground and background color to #e18ed0. Type out MERRY CHRISTAS. Convert to raster. Go to your plugins, select Mura Meister, Copies and use the follow settings
Tiling
Line
Number 1
Shift X 50
Shift Y 50
Angel 0
Rotation 0
Attenuation 0
Scale 100
Hit ok
Click back on your frame selections invert go back to wording and hit delete, select none.
Lower the opacity of this layer to 65
Add your tube of choice and bring it below the frame layer. Resize if you need to.
Open ele 34 in psp and copy and paste as a new layer below your tube layer.
Open ele57 in psp, copy and paste as a new layer resize to 50 percent then resize again to 70 percent. Place above frame layer to the left.
Open ele 24 in psp resize to 30 or 40 percent copy and paste as a new layer to the right of frame.
Open ele 19 resize to 50 percent copy and place behind the train.
Add a drop shadow of your choice to all elements except mask and paper behind frame.
Click on the tree layer within the frame and add a new raster 4.
Go back to your frame layer and using your wand select the inside of frame.
Click on your first new raster, go to Plugins Vanderlee Snowflake use these settings
Amount 250
Minimum Size 1
Maximum Size 12
Hardness 100
Transparency 0
Snow Color Basic Snow
Random Seed 20
Click ok
Click on your next blank new raster; Choose your Vanderlee Snowflake keep settings the same except for Random Seed change it to 30
Do this for the next 2 rasters changing the Random Seed to 40 and 50
Click selections and select none.
Label each of the snow layers Snow 1, Snow 2, Snow 3, and Snow 4. Hide snow layers 2, 3, and 4.
Open ele 14 in psp resize it 50 percent and then by 80 percent copy and paste as a new layer above frame layer.
Add your correct copyright.
Add your name
Time To Animate!
Open Animation
Go back into psp, copy merged and paste as new animation
Back in psp close off snow layer 1 and open snow layer 2 copy merged and paste after current frame. Continue this with snow layers 3 and 4
Now you have 4 frames in animation
Select all, frame properties change to 20
Save as gif file and you’re done.
Thank you for trying my first tutorial
Much Love and Happiness
Val
aka
LostAngel Graphics
Welcome to my new blog. I'm new to blogging like this so if you find anything that incorrect or off please don't hesitate to say and I will correct it as soon as I can.
I have been playing in PSP for about 5 or 6 years now since the death of my beautiful little girl passed and it has been a creative way for me to sorta heal and cope with the grief of her death. It was therapatic sitting in putting all my creative efforts into making a tag for my friends so I created LostAngel Graphics.
I have been playing in PSP for about 5 or 6 years now since the death of my beautiful little girl passed and it has been a creative way for me to sorta heal and cope with the grief of her death. It was therapatic sitting in putting all my creative efforts into making a tag for my friends so I created LostAngel Graphics.
My First Inspiration Michaella. 11/1/00 -11/5/02
My Second Inspiration and my reason for going on, Shane
I hope you enjoy my new adventure in writing tuts for all to enjoy.
Much love and happiness
Val
LostAngel Graphics
Subscribe to:
Posts (Atom)
